Stair profile SZ
Color variants
We supply profiles as standard in three color variants, we will process other colors from the RAL palette on request
- RAL 7037
- RAL 7024
- RAL 8019
The profile is treated with yellow chrome and Komaxit paint is applied
Application
SZ 10 is a profile that allows you to finish the edge of the stair coverings “stone carpet”, with a layer thickness of 10 mm.
SZ 15 is a profile that allows you to finish the edge of the stair coverings “stone carpet”, with a layer thickness of 15 mm The unique design allows you to finish both edges of one profile between the tread and risers and the tread of the stairs and face The transition between the edges is done by bending the profile, which provides high durability and aesthetic appearance The openings allow moisture to be dissipated through the openings along the profile
SZ 15 is a profile that allows you to finish the edge of the stair coverings “stone carpet”, with a layer thickness of 15 mm The unique design allows you to finish both edges of one profile between the tread and risers and the tread of the stairs and face The transition between the edges is done by bending the profile, which provides high durability and aesthetic appearance The openings allow moisture to be dissipated through the openings along the profile
Properties
- effective drainage of sheet piling
- resistance to corrosion and weathering
- tightness in the peripheral parts
- solution for quick and easy installation
- operating life of the staircase sheathing
- aesthetic apperance
Surface type
Concrete substrates, and other substrates that have sufficient rigidity and strength The substrate must be stable, clean and free of dirt Along the edge of the edge of the step is made a reduction, the width of the mounted profile 50 mm) and a depth of approx 1,5 mm.
Tools
Pocket rule or pocket tape, saw for cutting aluminium, knife, mixer or low-speed electric drill, basket mixer, stainless steel trowel, brush, paintbrush, putty knife or trowel, scaled container. The use of hand saws and chainsaws for cutting aluminium is allowed. It is not allowed to use tools, such as angle grinders, which cause thermal effect (rapid temperature increase) for cutting profiles.
Basic information
Material
Aluminum alloy
Surface finish
Yellow chrome with subsequent comaxitation
Warranty
5 years
Length
2 metres
Application
Balcony and terrace systems with glue floor